Transmission fluid helps keep mechanical components cool and lubricated, whether the gearbox is automatic or manual. Over time, the transmission's interior components wear down, and tiny particles
Most vehicles won’t require a transmission fluid change until they hit the 100,000-mile threshold, and that’s when the fluid will start to reach this darker brown stage. 5. Black. If your transmission fluid is black, it’s a cause for concern, and it’s time to replace the fluid.
To perform a transmission oil change, you will need: 1. The owner’s manual for your car. 2. The right type and quantity of transmission oil. 3. A means of raising your car, such as jack stands or ramps. 4. A transmission filter kit – this usually contains a gasket for the oil pan along with a new transmission filter.
How to Change your Transmission Fluid | Jeep Wrangler TJNSG 370 Transmission:Use ~2qts of Redline MT-90or MOPAR P/N: 4874464Torque to 22 ft-lbs
Step Four: Use a wrench to loosen the inspection plug on the side of the transmission. Place a drip pan under the plug and catch the excess transmission fluid that comes out. Step Five: Wait at least 15 minutes to let all the excess transmission fluid drain out of the case.
3. Add following initial quantity of Mopar® ATF +4, Automatic Transmission Fluid, to the transmission:a. If only fluid and filter were changed, add 5.0 L (10.6pts.) of transmission fluid to transmission. b. If the transmission was completely overhauled or the torque converter was replaced or drained, add 7.7 L (16.3 pts.) of transmission fluid
V1A9hVl. 454 212 287 78 285 229 347 74 271
how to change automatic transmission oil
